When installing a new roof, there are a few things to keep in mind. The first step is determining the proper slope for your roof. This should be done by measuring the top and bottom edges of your roof. Then, you can determine where the ridge cap will be placed. You may choose to have the ridge cap installed on either side or in the center. After you have determined which direction the ridge cap will be placed, you can start putting up the shingles.
Before installing the shingles, make sure to remove the old roofing. This is essential in order to install new underlayment and flashing. You will also need to remove old nails. It is best to use flat nails, as they won’t damage the new shingles. You’ll also want to cover your yard and landscaping with a tarp to prevent nails from raining down on your new roof. You’ll also want to be sure to secure your roofing felt paper to the underlayment with twelve staples placed close together.
When choosing a roofing contractor, you need to ensure the installation crew uses proper installation practices. Professional contractors use flashing to protect your home from leaks. They also install it around skylights and chimneys. Some contractors use tar or putty instead of flashing, which can allow water to flow towards your home.
If you live in a very cold climate, you should use ice and water barriers to prevent ice dams. Ice and water barriers are also very important to prevent windblown rain from accumulating on your roof. You can also install self-stick ice-and-water underlayment to prevent ice dams. You can use this product to cover the entire roof, or to only cover certain vulnerable parts of it.
The first step in a new roof installation is removing the old roof. Many homeowners attempt to install new roofing materials over the existing one, but this can lead to premature failure of the existing roof. Before beginning the job, make sure you wear Personal Protective Equipment (PPE) and stay alert for falling debris. If you’re doing the job yourself, make sure you wear a helmet, and use caution.
Another factor to consider is noise. The process of replacing a roof can be very loud. Hammering and ripping off old shingles will create a lot of noise. You should move any sensitive family members out of the house during this time if they cannot tolerate the noise. Additionally, you should make sure that you notify your neighbors about the project.
If you’re not able to do the work yourself, you may want to consider hiring a reliable roof company. There are plenty of resources to choose from and they often offer free estimates. Depending on the type of roof you have, you may want to get at least four different quotes before deciding on a contractor.